Quick Inquiry

• Please enter your first name.
  Please enter your last name.
  Please enter your designation.
  Please enter your company name.
  Please enter your email.
  Please enter your phone number.
  Please enter your town city.
  Please enter your town pin code.
  Please enter your town state.
• Please enter your town street address.
  Select Country United States of America Canada Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocoa (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Cote Divoire Croatia (local name: Hrvatska) Cuba Cyprus Czech Republic Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France France, Metropolitan French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Heard and Mc Donald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran (Islamic Republic of) Iraq Ireland Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Korea, Democratic Peoples Republic of Korea, Republic of Kuwait Kyrgyzstan Lao Peoples Democratic Republic Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macau Macedonia, The Former Yugoslav Republic of Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia, Federated States Of Moldova, Republic of Monaco Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Georgia and the South Sandwich Islands Spain Sri Lanka St. Helena St. Pierre and Miquelon Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania, United Republic of Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom United States Minor Outlying Islands Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Viet Nam Virgin Islands (British) Virgin Islands (U.S.) Wallis and Futuna Islands Western Sahara Yemen Yugoslavia Zaire Zambia Zimbabwe Please select your town country.
  Product of Interest Base Oil Lubricants Bitumen Fuel Oil Gas Oil Please select your product of interest.
  Please enter your comments.

  Prove you're not a robot

  Please enter captcha verification code.

Send Cancel

India Address

DELHI OFFICE:

SR Resources FZC
802, Krishna Apra Business Square
NSP, Pitam Pura
New Delhi 110064, Delhi (India)

info@sr-resources.com

MUMBAI OFFICE:

SR Resources FZC
605, Sai Samarth Business Park
Next to Wasan Motor Service Centre, Govandi (E)
Mumbai 400088, Maharashtra (India)

+91-22-25555058

+91-22-25555059

info@sr-resources.com

China Address

SHANGHAI OFFICE:

SR Resources FZC
1302, Building No. 1271
Pudong
Shanghai (China)

+86-21-60480200

+86-18-717922247

info@sr-resources.com

UAE Address

Corporate Headquarter

SR Resources FZC
H-01A, Hamriya Free Zone
Sharjah (UAE)

+971-6-5264870

+971 6 5262873

info@sr-resources.com

Contact Numbers

SHARJAH OFFICE

+971-6-5262871

MUMBAI OFFICE

+91-22-25555058

SHANGHAI OFFICE

+86-21-60480200

Specification

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 0.5
Density at 15 °C, kg/ltr	D-1298	0.85
Kinematic Viscosity at 40 °C, Cst	D-445	Min 8
kinematic viscosity at 100 °C, Cst	D-445	Min 2.28
Viscosity Index	D-2270	Min 90
Pour Point , °C	D-97	Max -6
Flash Point , °C	D-92	Min 170

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 1.0
Density at 15 °C, kg/ltr	D-1298	0.85
Kinematic Viscosity at 40 °C, Cst	D-445	Min 8.5
kinematic viscosity at 100 °C, Cst	D-445	Min 2.3
Viscosity Index	D-2270	Min 90
Pour Point , °C	D-97	Max -6
Flash Point , °C	D-92	Min 174

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 2.0
Density at 15 °C, kg/ltr	D-1298	0.878
Kinematic Viscosity at 40 °C, Cst	D-445	Min 29.4
kinematic viscosity at 100 °C, Cst	D-445	Min 5
Viscosity Index	D-2270	Min 92
Pour Point , °C	D-97	Max -3
Flash Point , °C	D-92	Min 200

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 2.0
Density at 15 °C, kg/ltr	D-1298	0.887
Kinematic Viscosity at 40 °C, Cst	D-445	Min 103
kinematic viscosity at 100 °C, Cst	D-445	Min 11
Viscosity Index	D-2270	Min 90
Pour Point , °C	D-97	Max -6
Flash Point , °C	D-92	Min 240

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 4
Density at 15 °C, kg/ltr	D-1298	0.901
Kinematic Viscosity at 40 °C, Cst	D-445	Min 450
kinematic viscosity at 100 °C, Cst	D-445	Min 29.5
Viscosity Index	D-2270	Min 90
Pour Point , °C	D-97	Max -3
Flash Point , °C	D-92	Min 250

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	Max 1.5
Density at 15 °C, kg/ltr	D-1298	0.87
Kinematic Viscosity at 40 °C, Cst	D-445	Min 18
kinematic viscosity at 100 °C, Cst	D-445	Min 3.5
Viscosity Index	D-2270	Min 90
Pour Point , °C	D-97	Max -6
Flash Point , °C	D-92	Min 190

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	L 0.5
Density at 15 °C, kg/ltr	D-1298	0.87
Kinematic Viscosity at 40 °C, Cst	D-445	Min 110
kinematic viscosity at 100 °C, Cst	D-445	Min 11
Viscosity Index	D-2270	Min 95
Pour Point , °C	D-97	Max -12
Flash Point	D-92	Min 242

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	L 0.5
Density at 15 °C, kg/ltr	D-1298	0.87
Kinematic Viscosity at 40 °C, Cst	D-445	Min 110.5
kinematic viscosity at 100 °C, Cst	D-445	Min 11.6
Viscosity Index	D-2270	Min 95
Pour Point , °C	D-97	Max -12
Flash Point	D-92	Min 245

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	L 0.5
Density at 15 °C, kg/ltr	D-1298	0.835
Kinematic Viscosity at 40 °C, Cst	D-445	Min 19.4
kinematic viscosity at 100 °C, Cst	D-445	Min 4.2
Viscosity Index	D-2270	Min 120
Pour Point , °C	D-97	Max -12
Flash Point ,°C	D-92	Min 220

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	L 0.5
Density at 15 °C, kg/ltr	D-1298	0.84
Kinematic Viscosity at 40 °C, Cst	D-445	Min 31.5
kinematic viscosity at 100 °C, Cst	D-445	Min 5.8
Viscosity Index	D-2270	Min 125
Pour Point , °C	D-97	Max - 12
Flash Point ,°C	D-92	Min 226

Characteristics	ASTM Method	Results
Appearance	-	Clear & Bright
Color	D-1500	L 0.5
Density at 15 °C, kg/ltr	D-1298	0.847
Kinematic Viscosity at 40 °C, Cst	D-445	Min 48
kinematic viscosity at 100 °C, Cst	D-445	Min 7.9
Viscosity Index	D-2270	Min 128
Pour Point , °C	D-97	Max -12
Flash Point ,°C	D-92	Min 240

Characteristics	ASTM Method	Results
Specific Gravity at 25°C	ASTM D-70		1.01  to  1.06
Penetration at 25°C,100gm, 5 Sec	ASTM D-5	0.1 MM	60 - 70
Softening Point , Ring & Ball	ASTM D-36	°C	49 - 56
Ductility at 25°C, after TFOT, Min	ASTM D-113	CM	100
Loss on Heating ,Max	ASTM D-6	%W	0.2
Drop in Penetration after Heating, Max	ASTM D-6 & ASTM D-5	%	20.0
Flash Point Cleveland open cup ,Min	ASTM D-92	°C	250
Solubility in CS2, Min	ASTM D-4	%W	99.5
Organic Matter Insoluble in CS2 , Max	ASTM D-4	%W	0.5
Spot Test	*A.A.S.H.O.T.102		Negative

Characteristics	ASTM Method	Results
Specific Gravity at 25°C	ASTM D-70		1.00 to 1.05
Penetration at 25°C,100gm,5 Sec	ASTM D-5	0.1 MM	80 - 100
Softening Point, Ring & Ball	ASTM D-36	°C	45 - 52
Ductility at 25°C, after TFOT, Min	ASTM D-113	CM	100
Loss on Heating, Max	ASTM D-6	%W	0.5
Drop in Penetration after Heating, Max	ASTM D-6 & ASTM D-5	%	20.0
Flash Point Cleveland open cup, Min	ASTM D-92	°C	250
Solubility in CS2, Min	ASTM D-4	%W	99.5
Organic Matter Insoluble in CS2, Max	ASTM D-4	%W	0.5
Spot Test	*A.A.S.H.O.T.102		Negative

Characteristics	ASTM Method	Results	MC30	MC70	MC250
Kinematic viscosity  at 60°C	D-2170	CST	30/60	70/140	250/500
Flash Point	D-1310	°C	38	38	66
Residue from distillation to 360°C,Min	D-402	% vol	50	55	67
Test on Residue from Distillation
Penetration at 25°C, 100g , 5 Sec	D-5	CM	120/250	120/250	120/250
Ductility at 25°C,   Min	D-113	CM	100.0	100.0	100.0
Solubility in Trichloroethylene, Min	D-2042	%	99.0	99.0	99.0
Water ,Max	D-95	% Vol	0.2	0.2	0.2

Characteristics	ASTM Method	Results	85/25	115/15
Specific Gravity at 25oC	ASTM D-70		1.01 to 1.05	1.01 to 1.05
Softening Point, Ring & Ball	ASTM D-36	°C	80/90	110/120
Penetration at 25°C , 100gm ,5 Sec	ASTM D-5	0.1MM	20/30	10/20
Ductility at 25°C , after TFOT , Min	ASTM D-113	CM	1.5	1.5
Loss on Heating ,Max	ASTM D-6	%wt	0.2	0.2
Flash Point Cleveland open cup ,Min	ASTM D-92	°C	260	260
Solubility in CS2, Min	ASTM D-4	%wt	99	99

Characteristics	150KG	180KG	200KG
-Body	0.6 +/- 0.02 MM	0.6 +/- 0.02 MM	0.8 +/- 0.02 MM
-Top & Bottom	0.6 +/- 0.02 MM	0.7 +/- 0.02 MM	0.8 +/- 0.02 MM
Height	86 CM	98 CM	98 CM
Diameter	50 CM	50 CM	55 CM
Lid Hole Position	CENTER	CENTER	CENTER
Lid Hole Diameter	10 +/- 1CM	10 +/- 1CM	10 +/- 1CM
Net Filling Capacity	147 +/- 3 KG	182 +/- 3KG	200 +/- 3KG
Gross Weight	156 +/- 3 KG	192 +/- 3 KG	215 +/- 3KG
Drum Tare Weight	8.2 +/- 0.1 KG	9.5 +/- 0.1	16.0 +/- 0.2
Color	GLOSSY BLACK	GLOSSY BLACK	GLOSSY BLACK

No.	Characteristics	Specifications
1	Acidity (Inorganic) Mgkoh / Gm Max	Nil
2	Ash Percentage by Weight Max.	0.1
3	Flash point (PMCC) C Min	66
4	Pour Point C. Max	18
5	Kinematics' Viscosity at 50 C CST Max	180
6	Sulphur Pet WT.Max (Quartz Tube)	3.5
7	Carbon Residue Raw bottom Pet Max	15
8	Water Pet. Vol. Max	0.1
9	Total Sediment Potent by Pet Max.	0.10
10	Density @ 15 C Max	0.990
11	Gross Calorific Value Kcal / Kg (Min.)	10100
12	C.C.A.I.	850
13	Vanadium Pot by WT. MG / KG Max.	350
14	Sodium Pot by WT MG/KG Max	50
15	Asphaltense Pot by WT.Max	14
16	Aluminium MG/KG Max	30

No.	Characteristics	ASTM Method	Unit	Result
1	Density at 15°C	ASTM D-1298	gm/ml	0.98
2	Flash Point (PMCC)	ASTM D-93	°C	Min 68
3	Pour Point	ASTM D-97	°C	Max + 9
4	Kinematic Viscosity @ 500C	ASTM D-445	Cst	Max 380
5	Total Sulphur	ASTM D-4294	%wt	Max 3.5
6	Carbone Residue	ASTM D-4530	%wt	Max 20
7	Ash Content	ASTM D-482	%wt	Max 0.15
* ASTM Methods shall be conducted in accordance with internationally accepted ASTM Methods such as ISO,ASTM or European Standrds.

S.No.	Characteristics	ASTM Method	Unit	Result
1	APPERANCE	VISUAL	-	Clear & Bright
2	Copper Strip Corrosion for 3hrs @100°C	ASTM D-130	-	Not worse than No.2
3	Density at 15°C	ASTM D-4052	Kg/m3	To be reported
4	K.V at 40°C	ASTM D-445	Cst	2.5 to 12
5	Flash Point (COC)	ASTM D-92	°C	Min 60
6	Sulphur Content	ASTM D-4294	PPM	Max 6000

S.No.	Characteristics	ASTM Method	Unit	Result
1	APPERANCE	VISUAL	-	Clear & Bright
2	Copper Strip Corrosion for 3hrs @100°C	ASTM D-130	-	Not worse than No.1
3	Density at 15°C	ASTM D-4052	Kg/m3	To be reported
4	K.V at 40°C	ASTM D-445	Cst	2 to 5
5	Flash Point (COC)	ASTM D-92	°C	Min 60
6	Sulphur Content	ASTM D-4294	PPM	Max 500

Characteristics ASTM Method   MIN MAX PHYSICAL PROPERTIES APPEARANCE The oil shall be clear transparent & free from suspended matter/sediments The oil shall be clear transparent & free from suspended matter/sediments Density@29.5 °C g/cm3 IS:1448(P-16)-1990   0.89 KinematicViscosity@27 °C, cST. IS:1448(P-25)-1976   27 Interfacial Tension @27 °C, N/M  IS:6104-1971 0.04   Flash Point, °C ( PMCC)   IS:1448(P-21)-1992 140   Pour Point, °C IS:1448(P-10)1970   -6 Water  content , PPM IS:13567-1992   50

Characteristics ASTM Method   MIN MAX ELECTRICAL PROPERTIES Electric Strength(BDV) IS:6792-1992     a)New unfiltered oil, kv(rms)   30   b)After filtration, kv(rms)   60   Dielectric dissipation Factor (tan delta)  @90 °C IS:6262-1971   0.002 Specific Resistance, ohm-cm IS:6103-1971     a) @ 90 °C   35x1012   b) @ 27 °C   1500x1012   CHEMICAL PROPERTIES Neutralisation Value,mg KOH/g. IS:1448(p:2)1967     a) Total acidity,mg.KOH/gm      0.03 b)Inorganic acidity/Alkalinity mgKOH/gm    NIL Corrosive Sulphur Annex B(IS:335/1993) Non-Corrosive Presence of oxidation inhibitor, % IS:13631-1993   0.3 Oxidation stability: IS: 12422-1988     a)Neutralistion value, after oxidation, mgKOH/g     0.4 b)Total sludge after oxidation, % by Wt     0.1

Characteristics ASTM Method IEC-60296 MIN MAX (A)PHYSICAL PROPERTIES KinematicViscosity,mm2/sec at  40 °C ISO 3104 12 at -30 °C                       ISO 3104 1800 Flash Point, °C( PMCC)   ISO 2719 135 Pour Point, °C ISO 3016 -40 Appearance  -- Clear; free from Sediment & suspended matter Density at 20 °CC g/ml ISO 3675/ISO 12185 0.895 Density at 29.5 °C g/ml ISO 3675/ISO 12185 0.895 Interfacial Tension mN/m at 25 °C,mN/m  ISO 6295 40 (B)ELECTRICAL  PROPERTIES Breakdown voltage IEC 60156 As delivered,  KV 30 After treatment, KV 70 Dielectric Dissipation Factor at 90 °C IEC60247/IEC 61620 0.005

Characteristics ASTM Method IEC-60296 MIN MAX (C)CHEMICAL PROPERTIES                          Acidity, mg KOH/g IEC 62021-1 0.01 Corrosive Sulphur DIN 51353 Non-Corrosive Water Content,mg/kg IEC 60814 30 Anti-oxidant additives IEC 60666 Not Detectable Oxidation stability: IEC 61125(Meth.C) a) Total acidity  mgKOH/g 1.2 b) Sludge %by mass 0.8 c)D.D.Factor @90 °C IEC 60247 0.5 PCB. Content IEC 61619 Not Detectable PCA. Content ,% BS 2000  Part346 3.0 2-Furfural Content, mg/kg IEC 61198 0.1

Characteristics ASTM Method IEC-296  MIN MAX (A)PHYSICAL PROPERTIES KinematicViscosity, mm2/sec       at 40 °C 7.3   16.5 at -15 °C                             7.3   800 Flash Point, °C ( PMCC)   7.4 140   Pour Point, °C 7.5 <=-30 Appearance 7.1 Clear; free from Sediment & suspended matter Density at 20 °Cg/ml 7.2   0.895 Density at 29.5 °C g/ml 7.2   0.895 Interfacial Tension N/M at 25 °C, N/M  7.6 0.04

Characteristics ASTM Method IEC-296  MIN MAX (B)ELECTRICAL  PROPERTIES Breakdown voltage 7.12     As delivered,  KV 30   After treatment, KV   50   Dielectric Dissipation Factor at 90 °C 7.13   0.005 (C)CHEMICAL PROPERTIES                          Acidity, mg KOH/g 7.7   0.03 Corrosive Sulphur 7.8 Non-Corrosive Water Content,mg/kg 7.9   40 Anti-oxidant additives 7.1 Absent Oxidation stability: 11.7.1     a) Total acidity  mgKOH/g   0.4 b) Sludge %by mass     0.1

Characteristics ASTM Method MIN MAX PHYSICAL PROPERTIES APPEARANCE A representative sample of oil shall be examined in a 100 mm thick layer at 27 °C The oil shall be clear transparent & free from suspended matter/sediments Density@29.5 °C g/cm3 IS :1448(P-16)-1990 0.89 KinematicViscosity@27 °C, cST. IS:1448(P-25)-1976 27 Interfacial Tension @27 °C, N/M  IS:6104-1971 0.04 Flash Point, °C (PMCC)   IS:1448(P-21)-1992 140 Pour Point, °C IS:1448(P-10)1970 -6 Water  content , PPM IS:13567-1992 50 ELECTRICAL PROPERTIES Electric Strength (BDV) IS:6792-1992 a)New unfiltered oil, kv (rms) 30 b)After filtration, kv (rms) 60 Dielectric dissipation Factor (tan delta) @90 °C IS:6262-1971 0.002 Specific Resistance, ohm-cm IS:6103-1971 a) @ 90 °C 35x1012 b) @ 27 °C 1500x1012

x

Characteristics ASTM Method MIN MAX CHEMICAL PROPERTIES Neutralisation Value, mg KOH/g. IS:1448(p:2)1967 a) Total acidity, mg.KOH/gm  0.03 b) Inorganic acidity/Alkalinity mgKOH/gm  NIL Corrosive Sulphur Annex B(IS:335/1993) Non-Corrosive Presence of oxidation inhibitor, % IS:13631-1993 The oil shall not contain antioxidant Oxidation stability: a) Neutralistion value, after oxidation, mgKOH/g, mgKOH/g Annexture C 0.4  b)Total sludge after oxidation , % by Wt of IS-335 0.1 Ageing Characteristics after Accelerated ageing (open beaker method with copper catalyst) IS :12177-1987 a) Specific Resistance,ohm-cm i) at 27 °C 2.5x 1012 ii) at 90 °C 2.5x 1012 b)Dielectric Dissipatation factor ( tan delta ) at 90 °C  IS:6262-1971 0.2 c) Total acidity,mg KOH/gm IS:1448(P:2)-1967 0.05 d) Total sludge value,%by wt Annex A of IS:12177 0.05